URC DRIVER GUIDE
Thank you for your purchase! This will guide you through the installation process. If you ever need any help throughout your installation, feel free to reach out to us at (417) 553-0504 or email us at
. We are here to help!
The PowerShades Driver for URC is built directly into URC's Accelerator program
It's important that you have went through the entirety of the pairing process (pairing remotes, verifying limits, and pairing the shades to the gateway) before you proceed with URC Driver!
STEP 1. Start by setting up your project information
STEP 2. Add rooms as desired to your project
STEP 3. Add URC devices to your project
STEP 4. Add PowerShade Devices to your project. They can be found under IP Databases > Window Shades.
Your Target IP will be the PowerShade Device! (RF Gateway or PoE)
Step 5. Continue with URC Setup as desired!