RTI DRIVER GUIDE
Thank you for your purchase! This will guide you through the installation process. If you ever need any help throughout your installation, feel free to reach out to us at (417) 553-0504 or email us at email@example.com
. We are here to help!
It's important that you have went through the entirety of the pairing process (pairing remotes, verifying limits, and pairing the shades to the gateway) before you proceed with RTI Driver!
This guide begins assuming you've already selected your RTI processor, created desire rooms, add desired RTI controllers, and have added the PowerShades Driver.
STEP 1. Select "PowerShades" under Drivers and enter the RF Gateway IP address or PoE Motor IP Address.
STEP 2. Add Macros to correlating Shade(s) for desired commands
STEP 3. Navigate to Controllers and select the desired button. Right click and select "Macro" > Create New Macro and select the correlating tag.
Once done, select source and drag the desired command from Sources > PowerShades [room name] > Shade Control > Desired Shade Control (such as jog, set, etc..) and drag the command to the button properties as pictured below.